Test suspension

Ethan

Ethan

New member
Has anybody used this testosterone suspension and what is the post injection pain like I’ve never used a water suspension before but it looks interesting. Can this be used as a pre-workout?
 

Attachments

  • IMG_2294.jpeg
    IMG_2294.jpeg
    35.9 KB · Views: 8
I've never used that particular brand, but have used Syn and Innovagen suspensions. I like them a lot as a preworkout, but many others don't find the effect that acute. You'll have to give it a try, I'd say anywhere from 50-100mg is good. The post injection pain likely comes from larger crystals of the test in suspension. The finer the grind, so to speak, the less the PiP. Veterinary standards may be pretty rough.

I never noticed much pip the two brands I used.
 
You're also likely to need a larger gauge needle. 23 or 25 is typical. Even the good stuff can block an insulin syringe, and that's a nuisance, to get stuck halfway through a shot.
 
Slartibartfast said:
You're also likely to need a larger gauge needle. 23 or 25 is typical. Even the good stuff can block an insulin syringe, and that's a nuisance to get stuck halfway through a shot.
Click to expand...
lol, you’re way nicer than I am. I’d have recommended 18-20ga LOL
When the crystals are visible, I don’t want to deal with a blockage 😆
Poke a hole with a roofing nail and just dump it in…lol….(joking, don’t use a roofing nail)
 
RigPig said:
lol, you’re way nicer than I am. I’d have recommended 18-20ga LOL
When the crystals are visible, I don’t want to deal with a blockage 😆
Poke a hole with a roofing nail and just dump it in…lol….(joking, don’t use a roofing nail)
Click to expand...
Ha, maybe it was never the crystals that caused the Pip, it was the core-sample sized harpoons people used to get it in.
 
I did a fair amount of vet unitest suspension, you will need a 21-22 gauge needle.
I did inno back in 2005-2006, the suspension is micronized powder and used a 23 gauge...easy to get in.
 
Funnyman said:
I did a fair amount of vet unitest suspension, you will need a 21-22 gauge needle.
I did inno back in 2005-2006, the suspension is micronized powder and used a 23 gauge...easy to get in.
Click to expand...
Univet went out of business for this gotta be 20+yrs ago now. Like you said real suspension can't pass a small gauge needle like 25ga so if this product can go through like nothing then it's micronized and that was never done by Univet to my knowledge. The real stuff from the 90's burns pretty good. It rarely came around and was $200/ea back in the early 90's.
 
You must log in or register to reply here.
Top