GENETEC Reviews

Thegodofgains said:
I actually did a friend a favour by pinning his delt for him to show him how it's done.

He was using a different lab but I still follow my usual methods of boiling the syringe so it's less viscous, ztrack etc.

But holy his stuff was still viscous as hell even when I was pushing the plunger. Poor guy has to go through this all the time.

I then had to do my own glute shot using genetec as my brand, and followed the same steps (boiling etc..) and showed him how I do glutes, since for him it's hard cuz of his flexibility and just the viscosity of his brand, it becomes like a bit tedious.

Mine went so smoothly. I obviously know its smooth because I've been using genetec as my go 2 for a long time; but showing someone else and then realizing it, they want to switch as it's effortless and quick.

The MCT oil is a superb idea.

I remember those old days when i used different labs, and it would be like I hit a brick wall in my muscles. Not fun at all cuz then you end up just jamming and moving the needle around.
Click to expand...
Thank you for posting your review.

Genetec only uses GSO in their preparations..

The human body is a very complex organism and if it had the choice it would prefer sharp metal objects not pinning into it. Some days the body is more forgiving and perhaps just by pure luck you find a "good" spot. If the brand is reputable then its more than likely just a luck thing and you found a "good" spot or a "stiff" spot. But again, pin that "good" spot many more times and scar tissue will likely build and it will become a "stiff" spot. The size gauge needle is also a big consideration. It is always a cringe feeling when people say they pin with 20-22 gauge needles. Not necessary in our humble opinion. Draw with 20/22 and pin with a 25g. Rotating locations is also critical especially if your pinning EOD or E3D etc.

A bit off topic but here is some anecdotal information about the seemingly randomness of injection experiences. Anyone who has suffered the absolute nightmare full blown ruthless Tren Ace cough can attest to lucky shots. Run Tren Ace (serious note: unless your very a serious bodybuilder and you need it, don't actually run it) and you will know all about roll of the dice shots where the odd time after or even during your injection you will begin to cough until it feels like half your organs are going to erupt out of your throat. After the coughing stops, and you realize you are still alive, you walk it off, because your on Tren Acetate and your the fucking man, nothing can stop you! You then do some google searches to confirm others have experienced it and if they are posting their similar experience they must be alive still, phew its not just me! Then you look in the mirror, you think about your newfound strength in the gym, and the dirty grainy striations coming out in your pecs and delts that you have never seen before. No other compound has made you feel like this, a strong, jacked (usually very sweaty and sleep deprived) asshole and you want to keep rolling on the Acetate train, so you work up the courage to do another shot typically 48 hours later. And usually the next shot is ok because its a luck thing a lot of the time.
 
Last edited:
G-Force said:
Thank you for posting your review.

Genetec only uses GSO in their preparations..

The human body is a very complex organism and if it had the choice it would prefer sharp metal objects not pinning into it. Some days the body is more forgiving and perhaps just by pure luck you find a "good" spot. If the brand is reputable then its more than likely just a luck thing and you found a "good" spot or a "stiff" spot. But again, pin that "good" spot many more times and scar tissue will likely build and it will become a "stiff" spot. The size gauge needle is also a big consideration. It is always a cringe feeling when people say they pin with 20-22 gauge needles. Not necessary in our humble opinion. Draw with 20/22 and pin with a 25g. Rotating locations is also critical especially if your pinning EOD or E3D etc.

L
Click to expand...

I always load my tren a first. That way atleast the majority of it goes in last. So if it happens it's at the end of the shot 😅

Yes I know it all gets mixed together but you can still notice a difference in the colour of the substances in the syringe
 
3bills said:
I always load my tren a first. That way atleast the majority of it goes in last. So if it happens it's at the end of the shot 😅

Yes I know it all gets mixed together but you can still notice a difference in the colour of the substances in the syringe
Click to expand...
ya it sucks when you start a 2 or 3ml injection and that tren tickle starts right away. You know your racing against the clock before that fucker goes off so you push that plunger as hard as you can
 
storman said:
ya it sucks when you start a 2 or 3ml injection and that tren tickle starts right away. You know your racing against the clock before that fucker goes off so you push that plunger as hard as you can
Click to expand...
Ya bro

I've pulled out many times and shot again because of this lol

Also I try to do tren a shots everyday day with a half inch slin pin to reduce the volume. I'm I go up to a ml per shot it's bound to happen
 
G-Force said:
Thank you for posting your review.

Genetec only uses GSO in their preparations..

The human body is a very complex organism and if it had the choice it would prefer sharp metal objects not pinning into it. Some days the body is more forgiving and perhaps just by pure luck you find a "good" spot. If the brand is reputable then its more than likely just a luck thing and you found a "good" spot or a "stiff" spot. But again, pin that "good" spot many more times and scar tissue will likely build and it will become a "stiff" spot. The size gauge needle is also a big consideration. It is always a cringe feeling when people say they pin with 20-22 gauge needles. Not necessary in our humble opinion. Draw with 20/22 and pin with a 25g. Rotating locations is also critical especially if your pinning EOD or E3D etc.

A bit off topic but here is some anecdotal information about the seemingly randomness of injection experiences. Anyone who has suffered the absolute nightmare full blown ruthless Tren Ace cough can attest to lucky shots. Run Tren Ace (serious note: unless your very a serious bodybuilder and you need, don't actually run it) and you will know all about roll of the dice shots where the odd time after or even during your injection you will begin to cough until it feels like half your organs are going to erupt out of your throat. After the coughing stops, and you realize you are still alive, you walk it off, because your on Tren Acetate and your the fucking man, nothing can stop you! You then do some google searches to confirm others have experienced it and if they are posting their similar experience they must be alive still, phew its not just me! Then you look in the mirror, you think about your newfound strength in the gym, and the dirty grainy striations coming out in your pecs and delts that you have never seen before. No other compound has made you feel like this, a strong, jacked (usually very sweaty and sleep deprived) asshole and you want to keep rolling on the Acetate train, so you work up the courage to do another shot typically 48 hours later. And usually the next shot is ok because its a luck thing a lot of the time.
Click to expand...
I always said I'd never use tren again.... but reading this post... I might reconsider. Damn you!!!!
 
G-Force said:
Thank you for posting your review.

Genetec only uses GSO in their preparations..

The human body is a very complex organism and if it had the choice it would prefer sharp metal objects not pinning into it. Some days the body is more forgiving and perhaps just by pure luck you find a "good" spot. If the brand is reputable then its more than likely just a luck thing and you found a "good" spot or a "stiff" spot. But again, pin that "good" spot many more times and scar tissue will likely build and it will become a "stiff" spot. The size gauge needle is also a big consideration. It is always a cringe feeling when people say they pin with 20-22 gauge needles. Not necessary in our humble opinion. Draw with 20/22 and pin with a 25g. Rotating locations is also critical especially if your pinning EOD or E3D etc.

A bit off topic but here is some anecdotal information about the seemingly randomness of injection experiences. Anyone who has suffered the absolute nightmare full blown ruthless Tren Ace cough can attest to lucky shots. Run Tren Ace (serious note: unless your very a serious bodybuilder and you need, don't actually run it) and you will know all about roll of the dice shots where the odd time after or even during your injection you will begin to cough until it feels like half your organs are going to erupt out of your throat. After the coughing stops, and you realize you are still alive, you walk it off, because your on Tren Acetate and your the fucking man, nothing can stop you! You then do some google searches to confirm others have experienced it and if they are posting their similar experience they must be alive still, phew its not just me! Then you look in the mirror, you think about your newfound strength in the gym, and the dirty grainy striations coming out in your pecs and delts that you have never seen before. No other compound has made you feel like this, a strong, jacked (usually very sweaty and sleep deprived) asshole and you want to keep rolling on the Acetate train, so you work up the courage to do another shot typically 48 hours later. And usually the next shot is ok because its a luck thing a lot of the time.
Click to expand...
very accurate description on tren lol...
bang on with the pinning too
 
Ill always rep Genetec, used their products for over 2 plus years. The customer service is unmatched, patient with customers, great packaging/labels. Fast shipping. Every product I've used have done what they are supposed to do.

You're in good hands with Genetec.
 
Shrek said:
I added some Genetec Tren Ace into my current cycle to get through a bit of a plateau and this stuff is wicked. Blew through it and still going!

Felt so good in the first week I did the Grouse Grind after leg day in just under 1 hour. That was a mistake, I couldn't walk the next day, but I was an unstoppable.
Click to expand...
I know it’s an old post but I just read it and couldn’t not comment on it. Reminds me of David goggins story about training legs heavy before running 100km or miles, cannot remember which one, and then peeing blood at the end of the race. Crazy stuff.
 
Another order of Test P, Masteron, Winny and Ibutamoren from these guys. GENETEC is absolutely first class in everything and it is why I‘ve ordered from them for years now. Super fast shipping, great products and of course amazing customer service! Cheers to GENETEC for being awesome!

Ps. The packaging and labels has changed since my last order but it looks really classy, love it!
 
lgetlegend said:
Another order of Test P, Masteron, Winny and Ibutamoren from these guys. GENETEC is absolutely first class in everything and it is why I‘ve ordered from them for years now. Super fast shipping, great products and of course amazing customer service! Cheers to GENETEC for being awesome!

Ps. The packaging and labels has changed since my last order but it looks really classy, love it!
Click to expand...

Top notch bro 🤟
 
I’ve been on their Test P, Mast, Winny, Mk-677, cardarine and T3 for a good amount of time now. As always customer service is the best and the stuff is top notch! The T3 I feel a bit less of a thermogenic effect than usual.
 
Last edited:
I don’t have experience with Genetec t3 but some food for thought 100mcg is a very high dose. With thyroid medication I would always try to go the pharm grade route for future. It’s not something I would mess with on UGL unless jano tested Is provided. I’ve never seen labs put out testing on clen or t3 and there has to be a reason getting things accurate at mcg dosing is hard froM what I’ve read.
 
You must log in or register to reply here.
Top