Primabolan used on non low body fat individual's

Grindtight

Active member
Trusted Member
Got to admit I've never tried primo before.Just reading up alot about it and came across an article saying if you dont have low body fat percentage it would be a waste.Yes I know its beneficial if your competing and running it for cutting.However would if you dont have lowww bf more like 14 % would it truly be a waste.This was the only article that mentioned this the others I read didnt say poop.
 

Sorbate

Noob
Trusted Member
No it’s not a waste. I found that primo help to make muscles looked rounder.
It is nothing like mast. Sometimes people try to compare it to mast, but completely different drugs.
I also find primo is a bit joint sparing.
It won’t make you stronger.
It won’t really help you burn fat.

It’s like taking more test without the test sides, so no bloat or estrogen, but test gains.
Don’t expect the world, but you bp won’t rise and your prostate won’t hate you, lol.
 

Grindtight

Active member
Trusted Member
No it’s not a waste. I found that primo help to make muscles looked rounder.
It is nothing like mast. Sometimes people try to compare it to mast, but completely different drugs.
I also find primo is a bit joint sparing.
It won’t make you stronger.
It won’t really help you burn fat.

It’s like taking more test without the test sides, so no bloat or estrogen, but test gains.
Don’t expect the world, but you bp won’t rise and your prostate won’t hate you, lol.
I also see dosages are as low as 200 therapeutic to as high as a gram...I'm thinking 500 should be sufficient other wise it gets mighty costly.
 

Sorbate

Noob
Trusted Member
I also see dosages are as low as 200 therapeutic to as high as a gram...I'm thinking 500 should be sufficient other wise it gets mighty costly.
I always ran 200 mg of test with 500 mg of primo. It works out to in a slin pin injected daily, 0.82 cc. Bearing in mind 250 test and 100 primo
I just use an empty vial put 5 cc of primo and .8 cc of test in it twice and shake before drawing to backload the slin pins. ( truthfully I put 2.5 cc of primo in 4 times and 1.6 c cof test in it once. I only have 3 cc barrels)
I call it primotestin, lol. I write it with a black marker on the outside.
 

silentlemon1011

Well-known member
Trusted Member
I always ran 200 mg of test with 500 mg of primo. It works out to in a slin pin injected daily, 0.82 cc. Bearing in mind 250 test and 100 primo
I just use an empty vial put 5 cc of primo and .8 cc of test in it twice and shake before drawing to backload the slin pins. ( truthfully I put 2.5 cc of primo in 4 times and 1.6 c cof test in it once. I only have 3 cc barrels)
I call it primotestin, lol. I write it with a black marker on the outside.
I know guys that even cruise at TRT plus 200 primo.
A couple guyssay they get zero losses after cycle with it.
I'll be giving it a try when I jump on TRT after my kids lll
 

Grindtight

Active member
Trusted Member
I always ran 200 mg of test with 500 mg of primo. It works out to in a slin pin injected daily, 0.82 cc. Bearing in mind 250 test and 100 primo
I just use an empty vial put 5 cc of primo and .8 cc of test in it twice and shake before drawing to backload the slin pins. ( truthfully I put 2.5 cc of primo in 4 times and 1.6 c cof test in it once. I only have 3 cc barrels)
I call it primotestin, lol. I write it with a black marker on the outside.
Daily injections for sure but with a slin pin no big deal.So I think I'm going to try your method except i want to throw 200mg deca into the mix as well.
 

Sorbate

Noob
Trusted Member
Daily injections for sure but with a slin pin no big deal.So I think I'm going to try your method except i want to throw 200mg deca into the mix as well.
I don't know if you'll fit that in to one slin, plus it makes no sense to add a wet drug to a drier cycle.
See usually people say to use primo when leaner because it make you look better by being drier because it doesn't convert to estrogen.
So if you use a drug like deca, dblo and so on or a high dose of test you are defeating the whole purpose IMO.
 

Grindtight

Active member
Trusted Member
I don't know if you'll fit that in to one slin, plus it makes no sense to add a wet drug to a drier cycle.
See usually people say to use primo when leaner because it make you look better by being drier because it doesn't convert to estrogen.
So if you use a drug like deca, dblo and so on or a high dose of test you are defeating the whole purpose IMO.
True I do agree however the winter days are terrible on my joints though I'd add it in for that purpose only..so now I'll opt out of the deca idea and use anavar.
 

Sorbate

Noob
Trusted Member
True I do agree however the winter days are terrible on my joints though I'd add it in for that purpose only..so now I'll opt out of the deca idea and use anavar.
If you read my first post, primo is joint sparing. My joints never ache on primo. Plus you don't get the deca rebound where you hurt for 3 weeks worse after discontinuing.
 

Sorbate

Noob
Trusted Member
True I do agree however the winter days are terrible on my joints though I'd add it in for that purpose only..so now I'll opt out of the deca idea and use anavar.
Proviron is wicked with primo and test. I liked it better than anavar. 50mg a day
 

Sorbate

Noob
Trusted Member
Interesting I never thought primo was joint sparing but that's good to know.
A friend of mine who had rumitoid arthritis really bad actually found studies on primo that proved that it enhanced ligament and tendon healing. The catch was you need to keep your test amount lower to reap the benefits.
 

ABMonkey

"Only one cycle"
Trusted Member
Any of you guys pulled bloods whilst using primo?

A few of them over on r/steroids have had bloodwork showing that it actually lowered E2. I'm wondering if you're a low aromatizer running test @ a cruise dose with high primo there is a possibility of E2 dropping too low.
 

Cheapshot

Well-known member
Trusted Member
I always ran 200 mg of test with 500 mg of primo. It works out to in a slin pin injected daily, 0.82 cc. Bearing in mind 250 test and 100 primo
I just use an empty vial put 5 cc of primo and .8 cc of test in it twice and shake before drawing to backload the slin pins. ( truthfully I put 2.5 cc of primo in 4 times and 1.6 c cof test in it once. I only have 3 cc barrels)
I call it primotestin, lol. I write it with a black marker on the outside.
Just make sure its the same carrier oil.. i dont think mct would mix evenly with grape seed oil..just and example
 

Sorbate

Noob
Trusted Member
Just make sure its the same carrier oil.. i dont think mct would mix evenly with grape seed oil..just and example
Makes no difference. I just shake it well before I pull out the oil to backload the slin pins. Even if the oils don’t mix, they will be suspended in each other and will be dispersed evenly enough not not really make a difference.
 
Top